Dinzagarms.com

Saiga Triggerguards & Hardware

Why do you need these? These triggerguards will save a lot of time & hassle. You simply remove the factory receiver plate/triggerguard assembly, and bolt this one on. No messing with the triggerguard spotweld or reshaping the existing triggerguard, etc.

Saiga PG Conversion Overview - Download this .pdf file for tips, suggestions, parts list and a brief overview of the pistol grip conversion.

Click the part # below to add to cart and pics for more info

Triggerguard Kits

 

# RAMSTG - $20 - Triggerguard for Saigas - For 5.45x39, 7.62x39, 223, 410 & 20ga Saigas. Includes triggerguard, hardware & instructions, you must cut the PG nut hole in the 410 & 20ga.



 

# RAMSTG2 - $25 - Triggerguard for Saigas - For 5.45x39, 7.62x39, 223, 410 & 20ga Saigas. Includes integral PG nut on triggerguard, hardware & instructions. Eliminates cutting the PG nut hole in the 410 & 20ga.



 

# RAMSTG3 - $25 - Triggerguard for Saiga-308 - For Saiga 308 only. Includes integral PG nut on triggerguard, hardware & instructions. Only drill 1 hole. Eliminates cutting the PG nut hole in the 308's.



 

# TGRAMS12 - $35 - RAM Triggerguard for Saiga12 - Includes triggerguard, hardware & instructions. Eliminates cutting PG nut hole in the receiver.



 

# TGAKS12 - $39 - AK Triggerguard Saiga12 - Includes AK triggerguard, selector stop, screws & nuts. To install, attach back end of triggerguard in existing receiver hole, then mark & drill the 4 front holes and assemble.



Converting A Saiga - Rough Overview

Saiga PG Conversion Overview - Download this .pdf file for tips, suggestions, parts list and a brief overview of the pistol grip conversion.

Step # 1 - Remove the 2 rear pins and completely disassemble.



Step # 2 - Remove the bottom receiver plate/triggerguard and cut PG nut hole.



Step # 3 - Paint receiver bottom and reassemble.

**For all models requiring a pistol grip nut hole be cut, download the Receiver Template here.